Mobile, independent starting aid device (Start Booster) with an extremely powerful AGM (LiFePO4) high-performance battery for motorcycles and cars. The Start Booster has a robust, impact-resistant housing. For gasoline and diesel vehicles. Can also be used as a mobile power supply and to supply the vehicle electronics when changing the battery. Charging voltage: 12 V Battery capacity: 22 Ah Starting current: 850 A Peak current: 2,500 A Weight approx. 11.8 kg Battery capacity (nominal charge) 22 Ah Charging voltage 12 V Weight 11.8 kg Starting current at 12 V 850 A Peak current at 12 V 2500 A  

Portable battery charger with jump start. For agriculture, garages, crafts and for private use. The device has a W-charging characteristic and must be disconnected and switched off after charging. It is robust and suitable for permanent use. Incl. Ammeter, thermal overload protection, charging current switch Power consumption 600 W, charging voltage 12/24 V. Charging current 25A + booster 280A, 2 charge current settings + booster Dimensions approx. 235 x 220 x 335 mm (L x W x H) Weight approx. 13.6 kg CAUTION: Charging should be observed when using  

Latest generation of professional battery chargers with jump start. By using digital control, the Digicar series can launch state-of-the-art vehicle engines without the risk of damage to vehicle electronics. Equipped with digital ammeter, function switch charging current, time function, fuse for short circuit and reverse polarity. Thermal protection when starting up too long. Ideal for loading AGM, GEL. Calcium and lead batteries. Automatic loading and maintenance function. Power consumption 720 W, charging voltage 12/24 V. Charging current 30A Equipped with electronic control of the charging process LED display of the charge status Dimensions approx. 235 x 220 x 335 mm (L x W x H) Weight approx. 10.1 kg CPS - Car Protection System is the patented system for protecting electronic vehicle components during start-up procedures. Overvoltages are prevented! Digicar program: This program has the function of safe starting (boosting) as well as the ability to control the battery and to charge it in an efficient mode without disconnecting the battery from its terminals.  

Professional battery starter and charger in heavy, wheeled version for use in car and truck repair shops and agriculture. Highest charging and starting currents, thanks to AC technology (380V). The battery starter and charger of the Autostar series is ideally suited to the harsh workshop routine. When the engine is started, the unit shuts off automatically, so remote control is no longer required. Incl. Timer for controlled fast charging Equipped with CPS to protect the electronic vehicle components such as engine control, airbag, etc. Power consumption 2600 W, charging voltage 12/24 V. Charging current 100A + Booster 1300A, 12 charging current settings + booster Dimensions approx. 575 x 330 x 770 mm (L x W x H) Weight approx. 67.4 kg Scope of delivery without mains plug CPS - Car Protection System is the patented system for protecting electronic vehicle components during start-up procedures. Overvoltages are prevented! Autostar program: start function (boost) in safety mode. The Autostar program has the CPS protection system, it enables the safe starting (boosting) of vehicles. The electronic control checks the state of charge of the battery. The jump start only starts under certain conditions. The controller monitors the output voltage to protect the on-board electronics.  

Professional battery starter and charger in heavy, wheeled version for use in car and truck workshops and agriculture. Highest charging and starting currents, thanks to AC technology (380V). The battery starter and charger of the Autostar series is ideally suited to the harsh workshop routine. When the engine is started, the unit shuts off automatically, so remote control is no longer required. Incl. Timer for controlled fast charging Equipped with CPS to protect the electronic vehicle components such as engine control, airbag, etc. Power consumption 3500 W, charging voltage 12/24 V. Charging current 120A + Booster 2000A, 12 charging current settings + booster Dimensions approx. 575 x 330 x 770 mm (L x W x H) Weight approx. 89.2 kg Scope of delivery without mains plug CPS - Car Protection System is the patented system for protecting electronic vehicle components during start-up procedures. Overvoltages are prevented! Autostar program: start function (boost) in safety mode. The Autostar program has the CPS protection system, it enables the safe starting (boosting) of vehicles. The electronic control checks the state of charge of the battery. The jump start only starts under certain conditions. The controller monitors the output voltage to protect the on-board electronics.  

Professional battery starter and charger for use in car repair shops. The battery starter and charger of the Autostar series is ideally suited to the harsh workshop routine. It has an ergonomically shaped carrying handle. When the engine is started, the unit shuts off automatically, so remote control is no longer required. Power consumption 480 W, charging voltage 12 V Charging current 25A + booster 300A, 2 charge current settings + booster Dimensions approx. 250 x 345 x 280 mm (L x W x H) Weight approx. 14.4 kg  

Professional battery starter and charger for use in car repair shops and small commercial vehicles. The battery starter and charger of the Autostar series is ideally suited to the harsh workshop routine. It has an ergonomically shaped carrying handle. When the engine is started, the unit shuts off automatically, so remote control is no longer required. Power consumption 950 W, charging voltage 12/24 V. Charging current 36A + Booster 450A, 6 charging current settings + booster Dimensions approx. 250 x 345 x 280 mm (L x W x H) Weight approx. 19 kg  

Professional battery start and charger in mobile version for use in car and truck workshops and agriculture. The battery starter and charger of the Autostar series is ideally suited to the harsh workshop routine. When the engine is started, the unit shuts off automatically, so remote control is no longer required. Incl. Timer for controlled fast charging Power consumption 1800 W, charging voltage 12/24 V. Charging current 50A + booster 580A, 6 charging current settings + booster Dimensions approx. 483 x 320 x 745 mm (L x W x H) Weight approx. 32.6 kg  

Professional battery charger of the latest generation based on inverter technology. Equipped with a digital ammeter, protection against thermal overload, short circuit and reverse polarity. Selectable charging current and timer function. Charging takes place without voltage peaks, thus no danger to the on-board electronics. Ideal for charging batteries of the latest design.      Power consumption 350 W, charging voltage 12/24 V.      Charging current 25 / 12.5 A, charging current settings stepless      Dimensions approx. 315 x 115 x 225 mm (L x W x H)      Weight approx. 3.9 kg  

New series of fully electronic battery chargers with protection against voltage spikes, which could damage the on-board electronics of vehicles. Ideal for charging AGM, GEL and wet batteries. Ideal for motor vehicles, vans and small boats      Power consumption 300 W, charging voltage 12/24 V      Charging current 16/8 A, 9 charging current settings      Incl. Desulphation function and LCD display      Dimensions approx. 295 x 125 x 75 mm (L x W x H)      Weight approx. 1.2 kg  

Professional battery charger of the latest generation based on inverter technology. Equipped with a digital ammeter, protection against thermal overload, short circuit and reverse polarity. Selectable charging current and timer function. Charging takes place without voltage peaks, thus no danger to the on-board electronics. Ideal for charging batteries of the latest design.      Power consumption 600 W, charging voltage 12/24 V.      Charging current 40/20 A, charging current settings stepless      12 V stabilization function with max. Electricity of 10 A      Incl. Sulfation function      Dimensions approx. 315 x 115 x 225 mm (L x W x H)      Weight approx. 3.9 kg  

Professional system for the battery analysis of 12V car batteries.      Easy operation via touch screen and pictograms      Built-in reverse polarity and short circuit protection      Built-in printer      Data interface to PC      Test standards CCA, SAE, EN, EN1, EN2, IEC, DIN, CA / MCA, JIS      Storage in premium carrying bag      Dimensions approx. 320 x 105 x 285 mm (L x W x H)      Weight approx. 1.6 kg  

NEW INTELLIGENT CHARGERS/STARTERS The new DIGICAR models are professional chargers/starters with electronic control (microprocessor). An advanced control panel allows the user to select different battery types (AGM, GEL, LIQUID, UNIVERSAL) for charging, 4 different charge levels (depending on battery capacity) and/or to set a charging time (TIMER). Electronic charge monitoring guarantees optimum charging of the battery (100%) and makes disconnecting the battery from the vehicle superfluous. Thanks to the fully automatic and safe charging process, the user does not need to check or control anything. When the charging phase is complete, the DIGICAR starts the maintenance step.The battery voltage (12 V or 24 V) is shown on the device display. During the charging phase, the battery voltage, the charging process in % or the remaining charging time can be displayed. Thanks to the 3 LEDs on the control panel, the user can even check the charge status of the battery (low, half, full). DIGICAR models are equipped with advanced safety systems, such as reverse polarity protection, overcurrent protection, battery fault indication, safe and protected booster charging. SUPPLY FUNCTION: A very important feature of the new DIGICAR model range is the SUPPLY function, a power supply function that makes it possible to maintain the current voltage of a vehicle battery (at 13.5 V) during the reprogramming process SAFE START: Thanks to the advanced electronic system (CPS), the devices in the DIGICAR model range enable safe and secure booster charging of vehicles (at 12 V or 24 V). A very useful feature for modern vehicles equipped with different electronic cards that could be damaged by the voltage spike in the event of unprotected booster charging. AUTOMATIC START: The CPS system does not require a remote control to start the vehicle. All DIGICAR models only supply the inrush current when the user operates the ignition key. Power consumption 2200 W, charging voltage 12/24 V Charging current 70A (max.100A) + booster 400 A (max 580A), infinitely variable charging current settings Dimensions approx. 465x350x840 mm (L x W x H) Weight approx. 33.5 kg  

latest generation of professional mobile battery chargers with jump start. By using digital control, the Digicar series can launch state-of-the-art vehicle engines without the risk of damage to vehicle electronics. Equipped with digital ammeter, function switch charging current, time function, fuse for short circuit and reverse polarity. Thermal protection when starting up too long. Ideal for loading AGM, GEL. Calcium and lead batteries. Automatic loading and maintenance function. Power consumption 1320 W, charging voltage 12/24 V. Charging current 55 / 27,5A + booster 380A, charging current settings stepless Dimensions approx. 260 x 415 x 650 mm (L x W x H) Weight approx. 20.9 kg CPS - Car Protection System is the patented system for protecting electronic vehicle components during start-up procedures. Overvoltages are prevented! Digicar program: This program has the function of safe starting (boosting) as well as the ability to control the battery and to charge it in an efficient mode without disconnecting the battery from its terminals.  

New series of fully electronic battery chargers with protection against voltage spikes, which could damage the on-board electronics of vehicles. Ideal for charging AGM, GEL and wet batteries. Ideal for motor vehicles, vans and small boats Power consumption 135 W, charging voltage 12 V Charging current 8 A, 9 charging current settings Incl. Desulphation function and LCD display Dimensions approx. 235 x 100 x 60 mm (L x W x H) Weight approx. 0.85 kg  

New series of fully electronic battery chargers with protection against voltage spikes, which could damage the on-board electronics of vehicles. Ideal for charging AGM, GEL and wet batteries. Ideal for motorcycles and motor vehicles. Power consumption 65 W, charging voltage 6/12 V Charging current 4 A, 4 charging current settings Incl. LCD display Dimensions approx. 225 x 80 x 50 mm (L x W x H) Weight approx. 0.65 kg  

New series of fully electronic battery chargers with protection against voltage spikes, which could damage the on-board electronics of vehicles. Ideal for charging AGM, GEL and wet batteries. Power consumption 21 W, charging voltage 12 V Fixed charging current of 1.5 A Dimensions approx 165 x 65 x 110 mm (L x W x H) Weight approx. 0.3 kg  

emi-professional charger with easy operation. Ideal for use in agriculture, construction and workshops. The device has a charging characteristic and must be disconnected and switched off after charging. It is robust and suitable for permanent use. Power consumption 150 W, charging voltage 6/12 V Charging current 11A, 2 charging current settings Dimensions approx. 200 x 260 x 175 mm (L x W x H) Semi-professional charger with easy operation. Ideal for use in agriculture, construction and workshops. The device has a W-charging characteristic and must be disconnected and switched off after charging. It is robust and suitable for permanent use. Power consumption 150 W, charging voltage 6/12 V Charging current 11A, 2 charging current settings Dimensions approx. 200 x 260 x 175 mm (L x W x H) Weight approx. 4 kg CAUTION: Charging should be observed when using  

Semi-professional charger with easy operation. Ideal for use in agriculture, construction and workshops. The device has a W-charging characteristic and must be disconnected and switched off after charging. It is robust and suitable for permanent use. Power consumption 300 W, charging voltage 12/24 V Charging current 16A, 2 charging current settings Dimensions approx. 200 x 260 x 175 mm (L x W x H) Weight approx. 7 kg CAUTION: Charging should be observed when using  

Professional charger for large charging stations, electric service and industry. The device has a W-charging characteristic and must be disconnected and switched off after charging. It is robust and suitable for permanent use. Incl. Ammeter, voltmeter, thermal overload protection, charging current and voltage switch Power consumption 800 W, charging voltage 6/12/24 V. Charging current 38A, 12 charging current settings Dimensions approx. 245 x 250 x 435 mm (L x W x H) Weight approx. 18 kg CAUTION: Charging should be observed when using  

Professional battery charger with jump start. In mobile version with handle for easy transport. The device has a W-charging characteristic and must be disconnected and switched off after charging. It is robust and suitable for permanent use. Incl. Ammeter, thermal overload protection, charging current switch Power consumption 1000 W, charging voltage 12/24 V. Charging current 30A + booster 300A, 4 charging current settings + booster Dimensions approx. 415 x 250 x 650 mm (L x W x H) Weight approx. 18.5 kg CAUTION: Charging should be observed when using  

Portable battery charger with jump start. For agriculture, garages, crafts and for private use. The device has a W-charging characteristic and must be disconnected and switched off after charging. It is robust and suitable for permanent use. Incl. Ammeter, thermal overload protection, charging current switch Power consumption 250 W, charging voltage 12/24 V Charging current 18A + Booster 200A, 2 charging current settings + booster Dimensions approx. 230 x 215 x 295 mm (L x W x H) Weight approx. 9.6 kg CAUTION: Charging should be observed when using  

Digital 12 V battery tester with LCD display      Testing and monitoring of car batteries      Checking the starting capacity, overload indicator      With USB output for smartphone or tablet      Direct connection to the cigarette lighter      Dimensions approx. 90 x 55 x 30 mm (L x W x H)      Weight approx. 0.2 kg  

Professional system for the battery analysis of 12V car batteries.      Easy operation via touch screen and pictograms      Built-in reverse polarity and short circuit protection      Data interface to PC      Test standards CCA, SAE, EN, IEC, DIN, CA, JIS      Storage in premium carrying bag      Dimensions approx. 320 x 105 x 285 mm (L x W x H)      Weight approx. 1.3 kg