5 min epoxy pack 200g, 100 g resin 100 g hardener 5 min processing time Resistant to solvents Fast and absolutely firm Glue remains elastic Honey-like viscous setting Does not become glass hard or brittle Heavy duty Before it hardens, it flows into the pores of the parts and thus guarantees a very firm connection Does not attack Styropor® Signal word danger Safety instructions GHS / H phrases  H 314: Causes severe skin burns and eye damage  H 315: Causes skin irritation  H317 can cause allergic reactions to your skin  H 319: Causes serious eye irritation  H411 ​​Toxic to aquatic life with long lasting effects Safety instructions GHS / P phrases  P 261: Avoid breathing dust / smoke / gas / mist / vapor / aerosol.  P 264: Wash thoroughly after use.  P 272: Do not wear contaminated work clothing outside the workplace.  Avoid the release of P273 into the environment.  P 280: Wear protective gloves / protective clothing / eye protection / face protection.  P 302 + 352: If in contact with skin: wash with plenty of water and soap  P 321: Special treatment (see ... on this label).  P 333 + 313: If skin irritation or rash occurs: Get medical advice / attention.  P 362: Take off contaminated clothing and wash before wearing again.  P 363: Wash contaminated clothing before reuse.  P 305 + 351 + 338: In case of contact with eyes: Rinse cautiously with water for a few minutes. Remove contact lenses, if possible. Continue rinsing  P 337 + 313: If eye irritation persists: Get medical advice / attention.  P 391: Absorb spilled quantities.  P 501: Dispose of contents / container ... Safety instructions / EUH  EUH 205: Contains epoxy-containing compounds. Can cause allergic reactions  

5 min epoxy pack 500g, 250 g resin 250 g hardener 5 min processing time Resistant to solvents Fast and absolutely firm Glue remains elastic Honey-like viscous setting Does not become glass hard or brittle Heavy duty Before it hardens, it flows into the pores of the parts and thus guarantees a very firm connection Does not attack Styropor® Signal word danger Safety instructions GHS / H phrases  H 314: Causes severe skin burns and eye damage  H 315: Causes skin irritation  H317 can cause allergic reactions to your skin  H 319: Causes serious eye irritation  H411 ​​Toxic to aquatic life with long lasting effects Safety instructions GHS / P phrases  P 261: Avoid breathing dust / smoke / gas / mist / vapor / aerosol.  P 264: Wash thoroughly after use.  P 272: Do not wear contaminated work clothing outside the workplace.  Avoid the release of P273 into the environment.  P 280: Wear protective gloves / protective clothing / eye protection / face protection.  P 302 + 352: If in contact with skin: wash with plenty of water and soap  P 321: Special treatment (see ... on this label).  P 333 + 313: If skin irritation or rash occurs: Get medical advice / attention.  P 362: Take off contaminated clothing and wash before wearing again.  P 363: Wash contaminated clothing before reuse.  P 305 + 351 + 338: In case of contact with eyes: Rinse cautiously with water for a few minutes. Remove contact lenses, if possible. Continue rinsing  P 337 + 313: If eye irritation persists: Get medical advice / attention.  P 391: Absorb spilled quantities.  P 501: Dispose of contents / container ... Safety instructions / EUH  EUH 205: Contains epoxy-containing compounds. Can cause allergic reactions  

Aqua Dicht Sealing compound 1 L  

Aqua Dicht Sealing compound 300 ml  

Aramid roving 805tex spool 20m Suitable for hand lamination, manufacture of coiled tubes and drawn and pressed profiles. Also suitable for reinforcing fuselages and wings. Processing with epoxy resin. Density 0.9 g / m.  

fast drying synthetic resin paint durable, for in- and outdooruse high covering capacity short drying time high UV and weather resistance excellent flow, high final hardness temperature resistant suitable for all surfaces Please observe the safety instructions! RAL9021 Maximum order quantity per shipment = 22 cans contains: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, < 2% aromatics Naphtha (petroleum), hydrodesulfurized heavy butyl acetate cobalt bis(2-ethylhexanoate)  

fast drying synthetic resin paint durable, for in- and outdooruse high covering capacity short drying time high UV and weather resistance excellent flow, high final hardness temperature resistant suitable for all surfaces Please observe the safety instructions! RAL9021 Maximum order quantity per shipment = 22 cans contains: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, < 2% aromatics Naphtha (petroleum), hydrodesulfurized heavy butyl acetate cobalt bis(2-ethylhexanoate)  

fast drying synthetic resin paint durable, for in- and outdooruse high covering capacity short drying time high UV and weather resistance excellent flow, high final hardness temperature resistant suitable for all surfaces Please observe the safety instructions! RAL9021 Maximum order quantity per shipment = 22 cans contains: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, < 2% aromatics Naphtha (petroleum), hydrodesulfurized heavy butyl acetate cobalt bis(2-ethylhexanoate)  

fast drying synthetic resin paint durable, for in- and outdooruse high covering capacity short drying time high UV and weather resistance excellent flow, high final hardness temperature resistant suitable for all surfaces Please observe the safety instructions! RAL9021 Maximum order quantity per shipment = 22 cans contains: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, < 2% aromatics Naphtha (petroleum), hydrodesulfurized heavy butyl acetate cobalt bis(2-ethylhexanoate)  

fast drying synthetic resin paint durable, for in- and outdooruse high covering capacity short drying time high UV and weather resistance excellent flow, high final hardness temperature resistant suitable for all surfaces Please observe the safety instructions! RAL9021 Maximum order quantity per shipment = 22 cans contains: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, < 2% aromatics Naphtha (petroleum), hydrodesulfurized heavy butyl acetate cobalt bis(2-ethylhexanoate)  

fast drying synthetic resin paint durable, for in- and outdooruse high covering capacity short drying time high UV and weather resistance excellent flow, high final hardness temperature resistant suitable for all surfaces Please observe the safety instructions! RAL9021 Maximum order quantity per shipment = 22 cans contains: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, < 2% aromatics Naphtha (petroleum), hydrodesulfurized heavy butyl acetate cobalt bis(2-ethylhexanoate)  

ÄROgrease L 0 gear fluid grease Semi-synthetic gear fluid grease for highly loaded gears…. -30 ° to + 150 ° C ÄROgrease L 0 is particularly suitable for Lubrication of normally loaded rolling and Plain bearings with low to medium speeds. Good even in dusty and damp conditions applicable. ÄROgrease L 0 use at low temperatures, as well as inclined or vertical waves, especially with non-oil-tight gear shafts ÄROgrease L 0 even at high Circumferential speeds can be used. High effectiveness through special EP additives ● high quality lithium complex soap grease ● semi-synthetic ● Use at low temperatures and at an angle or vertical waves, in particular for gear shafts that are not oil-tight ● water resistant ● corrosion and oxidation resistant ● very good wear protection properties ● high pressure absorption capacity ● Bitumen, solvent and heavy metal free · Reliable protection of the tooth flanks also with high temperatures.  

ÄRO Grease L 0 gear fluid grease 500 g ÄROgrease L 0 gear fluid grease Semi-synthetic gear fluid grease for highly loaded gears…. -30 ° to + 150 ° C ÄROgrease L 0 is particularly suitable for Lubrication of normally loaded rolling and Plain bearings with low to medium speeds. Good even in dusty and damp conditions applicable. ÄROgrease L 0 use at low temperatures, as well as inclined or vertical waves, especially with non-oil-tight gear shafts ÄROgrease L 0 even at high Circumferential speeds can be used. High effectiveness through special EP additives ● high quality lithium complex soap grease ● semi-synthetic ● Use at low temperatures and at an angle or vertical waves, in particular for gear shafts that are not oil-tight ● water resistant ● corrosion and oxidation resistant ● very good wear protection properties ● high pressure absorption capacity ● Bitumen, solvent and heavy metal free · Reliable protection of the tooth flanks also with high temperatures.  

Äronix aluminum contact paste 35 ml No seizing and corroding of screw and plug connections Reduces the frictional forces Improves conductivity Corrosion protection paste / metal protection paste Does not dry out and protects against moisture The soft paste improves smooth movements at contact points No dropping of the applied protective layer up to +200 ° C. Max. Temperature: 200 ° C Min. Temperature: -30 ° C Highlights & details Synthetic paste with high-purity aluminum pigments Improves electrical conductivity Silver-colored special paste with 40% aluminum content Silicone free  

Äronix battery and acid protection grease 100 ml It is an excellent insulating agent and prevents the battery from self-discharging. Battery pole grease / protective acid grease prevents damage due to oxidation or sulfate formation and acid corrosion on battery poles, terminals, screw connections, etc. No seizing and corroding of screw and plug connections Prevents leakage currents and reduces contact resistance Very good corrosion protection Higher starter power and longer life of the battery and accumulator Good compatibility with plastics and plastic plug connections Heat resistant up to 200 ° C.  

Äronix contact paste CU 35 ml Lubricating paste for copper and steel contact points. Improves the lubricity of the contact points and increases the electrical conductivity. Prevents sparking. Reduces the frictional forces. No seizing and corroding of screw and plug connections. Improves the discharge on statically charged elements. Reduces the contact contact resistance. Easy disassembly of screwed and plugged connections. Lubricating paste for copper and steel contact points. Improves the lubricity of the contact points and increases the electrical conductivity. Prevents sparking. Reduces the frictional forces. No seizing and corroding of screw and plug connections. Improves the discharge on statically charged elements. Reduces the contact contact resistance. Easy disassembly of screwed and plugged connections. No seizing and corroding of screw and plug connections Reduces the frictional forces Improves conductivity Corrosion protection paste / metal protection paste Does not dry out and protects against moisture The soft paste improves smooth movements at contact points No dropping of the applied protective layer up to +200 ° C Highlights & details Synthetic paste with high-purity copper pigments Improves electrical conductivity Copper-colored special paste with 50% copper content Silicone free  

For the lubrication of heavily loaded   Plain, ball and roller bearings at deep and   high operating temperatures. ● Emergency running properties thanks to PTFE ● Excellent plastic compatibility ● Temperature range from -30 ° to + 160 ° C. ● Special lubricating grease in the plastic   processing with emergency running properties. ● Resistant to dilute aqueous acids   and lyes. ● Walk stable with changing loads and   Speeds. ● Long-term lubricant in damp and   dry areas of application. ● Resistant to aging. ● Good sealing behavior. ● High pressure absorption capacity and high   Exposure to EP agents. ● Silicone free For the lubrication of bearings in the plastic,   Packaging office, household machinery etc. ● For general lubrication during assembly   Plastic gears and gear ratios ● For rolling, ball and plain bearings which are thermal as well   can withstand high mechanical loads e.g. in electric motors   with lifetime lubrication or long   Regreasing intervals. ● For general lubrication during assembly Soap type: polyurea, PAO + PTFE Shape: pasty Color: yellowish, smooth, smooth Dropping point:> 300 ° C Temperature determination: -30 to + 160 ° C (briefly + 180 ° C) Consistency / NLGI: 1-2 Walk penetration: 265-295 Corrosion protection: 0 (DIN51802) Corrosion effect: on Copper at 150 ° C: 1 A (DIN 51811) Designation: KP2P-30 (DIN 51502) Safety: Free of lead compounds, sulfate, Chlorides  

Äronix fully synthetic lubricating grease 100 g For lubrication on sliding, ball and   Rolling bearings at low and high operating   temperatures. ● for injection molding tools at high   Tool temperatures. ● Excellent plastic compatibility ● Temperature range from -30 ° to + 160 ° C. ● Resistant to dilute aqueous   Acids and alkalis. ● Walk stable with changing loads   and speeds. ● Long-term lubricant in damp and   dry areas of application. ● Resistant to aging. ● Good sealin For the lubrication of bearings in the plastic, Packing   Office, household machines ● For rolling, ball, roller and plain bearings the thermal   are also mechanically highly resilient ● Lubricant for plastics, bearings and gears   Use for lifetime lubrication and long   Regreasing intervals ● For general lubrication during assembly Soap type: polyurea, PAO Shape: pasty Color: yellowish, smooth, smooth Dropping point:> 300 ° C Temperature determination: -30 to + 160 ° C (briefly + 180 ° C) Consistency / NLGI: 1-2 Walk penetration: 265-295 Corrosion protection: 0 (DIN51802) Corrosion effect: on Copper at 150 ° C: 1 A (DIN 51811) Designation: KP2P-30 (DIN 51502) Safety: Free of lead compounds, sulfate, Chlorides and fluorides  

Äronix high temperature grease + PTFE 100 g ● Attenuated movements   Shock loads and vibrations   activated PTFE particles ● For the lubrication of heavily loaded   Plain, ball and roller bearings for medium-sized ones   Temperatures and speeds ● Temperature range -30 ° to + 140 ° C, at   are continuous relubrication   Operating temperatures up to + 180 ° C possible ● Offers excellent protection and   Wear caused by white solid lubricant particles. ● Emergency running properties thanks to PTFE ● Walk stable with changing loads and   Speeds ● Long-term lubricant in damp and   dry areas of application ● Resistant to aging ● Good sealing behavior ● High pressure absorption capacity and high   Exposure to EP agents. ● Good conveying properties in central   lubrication systems ● Silicone free ● For rolling, ball and plain bearings which are thermally as   are also mechanically highly resilient. ● For lubrication during assembly. ● For long-term lubrication of plain and roller bearings,   on packaging and production machines, in   electrical engineering, RC model building, motorcycles,   Car, truck in paper industry etc. ● Resistance to water, salt water, as well   weak acids and alkaline solutions ● Reduces the frictional forces ● Very good adhesion, splashes with fast movements   not starting. ● Very temperature resistant ● Low oil separation ● Good wear protection  

Äronix high temperature grease + PTFE 35 g ● Attenuated movements   Shock loads and vibrations   activated PTFE particles ● For the lubrication of heavily loaded   Plain, ball and roller bearings for medium-sized ones   Temperatures and speeds ● Temperature range -30 ° to + 160 ° C, at   are continuous relubrication   Operating temperatures up to + 200 ° C possible ● Offers excellent protection and   Wear caused by white solid lubricant particles. ● Emergency running properties thanks to PTFE ● Walk stable with changing loads and   Speeds ● Long-term lubricant in damp and   dry areas of application ● Resistant to aging ● Good sealing behavior ● High pressure absorption capacity and high   Exposure to EP agents. ● Good conveying properties in central   lubrication systems ● Silicone free ● For rolling, ball and plain bearings which are thermally as   are also mechanically highly resilient. ● For lubrication during assembly. ● For long-term lubrication of plain and roller bearings,   on packaging and production machines, in   electrical engineering, RC model building, motorcycles,   Car, truck in paper industry etc. ● Resistance to water, salt water, as well   weak acids and alkaline solutions ● Reduces the frictional forces ● Very good adhesion, splashes with fast movements   not starting. ● Very temperature resistant ● Low oil separation ● Good wear protection  

Äronix High-Flon PTFE oil is a fully synthetic and well adhering high temperature PTFE oil. It contains PTFE to improve the sliding, lubricating and emergency running properties. High-Flon PTFE oil forms a stable lubricating film and extremely reduces friction and wear. Due to the wide temperature range from -50 ° C to +160 ° C (briefly up to + 200 ° C), the product can be used universally, e.g. on bicycle chains, on Bowden cables, in model construction, on plastic gears, as weapon oil for lock parts and fits. Highlights & details Resealable bottle with spout  

Äronix long-life grease EP2 100 g ● For the lubrication of heavily loaded   Plain, ball and roller bearings for medium-sized ones Temperatures and speeds ● resistance to water,   Salt water, weak acids and alkaline   solvent ● Temperature range -30 ° to + 110 ° C ● Walk stable with changing loads and   Speeds ● Long-term lubricant in damp and   dry areas of application ● Resistant to aging ● Good sealing behavior ● High pressure absorption capacity and high   Exposure to EP agents ● Good conveying properties in central   lubrication system ● For the lubrication of threads, threaded spindles,   Screws, guides, etc. ● For roller, ball and plain bearings that are mechanically high   are resilient under moist operating conditions. ● For the lubrication of bearings in the   Agriculture, construction machinery and forestry. ● On bearings on industrial trucks,   Slewing ring bearings on cranes, truck trailer platform. ● Water pumps and Simmering sealing grease. ● everywhere in damp rooms or areas of application in   free… ● Excellent resistance to water,   Salt water, weak acids and alkaline   Solutions. ● Reduces the frictional forces. ● Adheres very well. ● Very temperature resistant. ● Low oil separation. ● Corrosion protection paste / metal protection paste ● Good wear protection.  

Äronix long-life grease EP2 500 g ● For the lubrication of heavily loaded   Plain, ball and roller bearings for medium-sized ones Temperatures and speeds ● resistance to water,   Salt water, weak acids and alkaline   solvent ● Temperature range -30 ° to + 110 ° C ● Walk stable with changing loads and   Speeds ● Long-term lubricant in damp and   dry areas of application ● Resistant to aging ● Good sealing behavior ● High pressure absorption capacity and high   Exposure to EP agents ● Good conveying properties in central   lubrication system ● For the lubrication of threads, threaded spindles,   Screws, guides, etc. ● For roller, ball and plain bearings that are mechanically high   are resilient under moist operating conditions. ● For the lubrication of bearings in the   Agriculture, construction machinery and forestry. ● On bearings on industrial trucks,   Slewing ring bearings on cranes, truck trailer platform. ● Water pumps and Simmering sealing grease. ● everywhere in damp rooms or areas of application in   free… ● Excellent resistance to water,   Salt water, weak acids and alkaline   Solutions. ● Reduces the frictional forces. ● Adheres very well. ● Very temperature resistant. ● Low oil separation. ● Corrosion protection paste / metal protection paste ● Good wear protection.  

Äronix low temperature grease LTG 2 500 g ● Temperature range -60 ° to + 120 ° C. ● Due to the low coefficient of friction, high   Speeds can be achieved. ● When lubricating electrical components with high   Speeds can be used ● Resistance to water ● Walk stable with changing loads and   Speeds ● Long-term lubricant in damp and dry   Areas of application. ● Good conveying properties in   Central lubrication systems ● Silicone free ● For rolling and plain bearings in the low temperature range ● Can be used in electromechanical valve controls ● For the lubrication of small gears, especially for   high speeds ● For the lubrication of plastic / plastic and   Plastic / metal pairings ● Synthetic low-temperature grease ● Very good water resistance ● Good protection against wear and corrosion ● Suitable for long-term lubrication ● Marking according to KP2K-60 (DIN 51502) ● Resistant to aging