Secondary glue 5011 Smartpen 30g.  

R&G Glass fabric tape 130g / m² 50mm, 10m (LW) Hull seam tape, tanks, pipes, boat building, sports equipment, repairs and reinforcements of all kinds.  

Electrically conductive wire adhesive, 9ml, for all repairs if no soldering iron, soldering tin are available, or the high temperatures of the soldering iron do not allow the repair. Easy to apply, for low voltages up to approx. 48 V - whether AC or DC - does not matter. Based on microcarbon technology. Lead-free. Hardening in approx. 24 h, Made in USA.  

Bondic is one of the world's first UV repair pen. Bondic works where normal glue fails! With Bondic, fractures can be filled in seconds and cured under UV light. Then just e.g. Process with abrasive material and bring it into the desired shape. Bondic works with any material: plastic, wood, metal and even fabric! Contents: 1 cartridge (4g), UV LED, LED holder  

Epoxi Casting Resin (water-clear) + Hardener W 300, kit/  675 g. Highly transparent, almost water clear components, good UV resistance, largely free of air bubbles. Polishable, hard surface. Very good impact strength, low shrinkage. Can be coloured with R&G Universal colour pastes or transparent colours and dry pigments of all types and can be modified with all kinds of fillers (metal powder, effect pigments, dry sand, etc.). Also suitable for coatings and as laminating resin system with a very long pot life. Mixing ratio: 100 : 35 parts by weight of resin to hardener / kit contains 500 g Resin + 175 g Hardener  

5 min epoxy pack 500g, 250 g resin 250 g hardener 5 min processing time Resistant to solvents Fast and absolutely firm Glue remains elastic Honey-like viscous setting Does not become glass hard or brittle Heavy duty Before it hardens, it flows into the pores of the parts and thus guarantees a very firm connection Does not attack Styropor® Signal word danger Safety instructions GHS / H phrases  H 314: Causes severe skin burns and eye damage  H 315: Causes skin irritation  H317 can cause allergic reactions to your skin  H 319: Causes serious eye irritation  H411 ​​Toxic to aquatic life with long lasting effects Safety instructions GHS / P phrases  P 261: Avoid breathing dust / smoke / gas / mist / vapor / aerosol.  P 264: Wash thoroughly after use.  P 272: Do not wear contaminated work clothing outside the workplace.  Avoid the release of P273 into the environment.  P 280: Wear protective gloves / protective clothing / eye protection / face protection.  P 302 + 352: If in contact with skin: wash with plenty of water and soap  P 321: Special treatment (see ... on this label).  P 333 + 313: If skin irritation or rash occurs: Get medical advice / attention.  P 362: Take off contaminated clothing and wash before wearing again.  P 363: Wash contaminated clothing before reuse.  P 305 + 351 + 338: In case of contact with eyes: Rinse cautiously with water for a few minutes. Remove contact lenses, if possible. Continue rinsing  P 337 + 313: If eye irritation persists: Get medical advice / attention.  P 391: Absorb spilled quantities.  P 501: Dispose of contents / container ... Safety instructions / EUH  EUH 205: Contains epoxy-containing compounds. Can cause allergic reactions  

Bondic is one of the world's first UV repair pen. Bondic works where normal glue fails! With Bondic, fractures can be filled in seconds and cured under UV light. Then just e.g. Process with abrasive material and bring it into the desired shape. Bondic works with any material: plastic, wood, metal and even fabric! Contents: 1 cartridge (4g)  

WEYER adhesive steel 125g  

ERGO 5300 Secondary glue 20g.  

Epoxi Casting Resin (water-clear) + Hardener W 300, kit/ 1,35 kg. Highly transparent, almost water clear components, good UV resistance, largely free of air bubbles. Polishable, hard surface. Very good impact strength, low shrinkage. Can be coloured with R&G Universal colour pastes or transparent colours and dry pigments of all types and can be modified with all kinds of fillers (metal powder, effect pigments, dry sand, etc.). Also suitable for coatings and as laminating resin system with a very long pot life. Mixing ratio: 100 : 35 parts by weight of resin to hardener / kit contains 1 kg Resin + 350 g Hardener  

Glass fiber ground (0.2mm) 200g can Fiber filler and molding compounds, plastic plasters, putty, glue, anti-corrosion coatings, asbestos replacement. execution 0.2 mm length Fast, easy wetting For epoxy, polyester and vinyl ester resins.  

Glass roving 2400tex spool 100m. Universal applicable multi-end-roving made of e-glas with excellent mechanical and dielectric properties. Suitable for hand lamination, manufacture of coiled tubes and drawn and pressed profiles. Also suitable for reinforcing fuselages and wings. Processing with epoxy resin. Good and fast impregnation. For epoxyd-, polyester- and vinyl ester resins. Density 2.4 g / m.  

ERGO 5300 Secondary glue 20g.  

EP cast resin + hardener, clear 325g colorless Processing time 5h 85g hardener 240g resin execution Very good UV resistance Highly transparent components Polishable, hard surface Outstanding impact resistance Completely tack-free curing in thin layers Very suitable for transparent coatings Also suitable as a laminating resin system with a very long processing time. Signal word     danger Safety instructions GHS / H phrases  H 315: Causes skin irritation  H317 can cause allergic reactions to your skin  H 319: Causes serious eye irritation  H411 ​​Toxic to aquatic life with long lasting effects  H 314: Causes severe skin burns and eye damage Safety instructions GHS / P phrases  P 261: Avoid breathing dust / smoke / gas / mist / vapor / aerosol.  P 264: Wash thoroughly after use.  P 272: Do not wear contaminated work clothing outside the workplace.  Avoid the release of P273 into the environment.  P 280: Wear protective gloves / protective clothing / eye protection / face protection.  P 302 + 352: If in contact with skin: wash with plenty of water and soap  P 321: Special treatment (see ... on this label).  P 333 + 313: If skin irritation or rash occurs: Get medical advice / attention.  P 362: Take off contaminated clothing and wash before wearing again.  P 363: Wash contaminated clothing before reuse.  P 305 + 351 + 338: In case of contact with eyes: Rinse cautiously with water for a few minutes. Remove contact lenses, if possible. Continue rinsing  P 337 + 313: If eye irritation persists: Get medical advice / attention.  P 391: Absorb spilled quantities.  P 501: Dispose of contents / container ...  P 260: Do not breathe dust / smoke / gas / mist / vapor / aerosol.  P 303 + 361 + 353: In case of contact with skin (or hair): Take off all soiled, soaked clothing immediately. Wash / shower skin with water  P 310: Call a poison center or doctor immediately.  P 405: Store locked up. Safety instructions / EUH  EUH 205: Contains epoxy-containing compounds. Can cause allergic reactions  

R&G Glass fabric tape 130g / m² 25mm, 10m (LW) Hull seam tape, tanks, pipes, boat building, sports equipment, repairs and reinforcements of all kinds.  

5 min epoxy pack 200g, 100 g resin 100 g hardener 5 min processing time Resistant to solvents Fast and absolutely firm Glue remains elastic Honey-like viscous setting Does not become glass hard or brittle Heavy duty Before it hardens, it flows into the pores of the parts and thus guarantees a very firm connection Does not attack Styropor® Signal word danger Safety instructions GHS / H phrases  H 314: Causes severe skin burns and eye damage  H 315: Causes skin irritation  H317 can cause allergic reactions to your skin  H 319: Causes serious eye irritation  H411 ​​Toxic to aquatic life with long lasting effects Safety instructions GHS / P phrases  P 261: Avoid breathing dust / smoke / gas / mist / vapor / aerosol.  P 264: Wash thoroughly after use.  P 272: Do not wear contaminated work clothing outside the workplace.  Avoid the release of P273 into the environment.  P 280: Wear protective gloves / protective clothing / eye protection / face protection.  P 302 + 352: If in contact with skin: wash with plenty of water and soap  P 321: Special treatment (see ... on this label).  P 333 + 313: If skin irritation or rash occurs: Get medical advice / attention.  P 362: Take off contaminated clothing and wash before wearing again.  P 363: Wash contaminated clothing before reuse.  P 305 + 351 + 338: In case of contact with eyes: Rinse cautiously with water for a few minutes. Remove contact lenses, if possible. Continue rinsing  P 337 + 313: If eye irritation persists: Get medical advice / attention.  P 391: Absorb spilled quantities.  P 501: Dispose of contents / container ... Safety instructions / EUH  EUH 205: Contains epoxy-containing compounds. Can cause allergic reactions  

Straight scissors for glass and carbon fibre fabrics, also suitable for aramid (Kevlar) to a limited extent. Thanks to optimised grinding and high stainless steel quality - ice-hardened 1.4034, these scissors offer very good cutting performance and an extremely long service life. The hardness is 57 HRC! Due to the one-sided micro-serration (0.25), the fabric cannot slip, so that precise cuts are possible. Fatigue-free, glass-fibre reinforced and break-proof two-component plastic handle with soft rubber insert (PP+TPE) Total length: approx. 20 cm Cutting length: approx. 85 mm Weight: approx. 87 g Note: Kevlar® is a registered trademark of DuPont  

Charcoal / aramid fabric 210g / m² (twill) 1m roll, 50 cm width The fabric with endless possibilities. The carbon fibers achieve high rigidity and compressive strength, the aramid fibers ensure good impact resistance and wear resistance.  

This silicone rubber adhesive and sealant TN3305C-T, is anti-corrosive, fast curing, very good adhesion, electrically insulating, low outgassing classified, non-yellowing and has improved tack-free times (9min). It is therefore suitable for countless applications, such as sealing, bonding and insulating in antenna construction or the automotive sector, for securing components against vibrations or for protecting printed circuit boards against corrosion and moisture. The catalyst is titanium instead of tin. Technical data: Dielectric strength: 26 kV/mm Viscosity: self-levelling Tensile strength: 1.5 Mpa Special features: self-levelling Manufacturer colour clear Content 100 ml Type TN3305C-T, replaces TSE397, TSE3921, TSE3972, TSE3975 Not for PE  

ERGO 5880 Secondary glue 20g.  

Glass fabric tape 225g / m² 40mm, 10m (Silan LW) Hull seam tape, tanks, pipes, boat building, sports equipment, repairs and reinforcements of all kinds.  

Glass fabric tape 225g / m² 100mm, 10m (Silan LW) Hull seam tape, tanks, pipes, boat building, sports equipment, repairs and reinforcements of all kinds.  

Glass fabric tape 225g / m² 30mm, 10m (Silan LW) Hull seam tape, tanks, pipes, boat building, sports equipment, repairs and reinforcements of all kinds.  

Resin and hardener HT2, pack 296 g Processing time 45 min For glass, aramid and carbon fibers, wood, metal, expanded polystyrene EPS, etc. Highly transparent, almost water-clear 2-component epoxy resin Non-tacky hardening of even the thinnest layers Low-viscosity, solvent and filler-free, highly transparent laminating resin Processing in all common processes such as Hand lamination, pressure and vacuum impregnation as well as pressing and winding Mixing ratio: 100: 48 parts by weight of resin: hardener Curing time: 24 hours cold curing 1x 200 g resin 1x 96 g hardener Signal word     danger Safety instructions GHS / H phrases  H 302 + 332: Harmful if swallowed or if inhaled  H 314: Causes severe skin burns and eye damage  H317 can cause allergic reactions to your skin  H 412: Harmful to aquatic life with long lasting effects  H 315: Causes skin irritation  H 319: Causes serious eye irritation  H411 ​​Toxic to aquatic life with long lasting effects Safety instructions GHS / P phrases  P 260: Do not breathe dust / smoke / gas / mist / vapor / aerosol.  P 303 + 361 + 353: In case of contact with skin (or hair): Take off all soiled, soaked clothing immediately. Wash / shower skin with water  P 310: Call a poison center or doctor immediately.  P 305 + 351 + 338: In case of contact with eyes: Rinse cautiously with water for a few minutes. Remove contact lenses, if possible. Continue rinsing  P 405: Store locked up.  P 501: Dispose of contents / container ...  P 261: Avoid breathing dust / smoke / gas / mist / vapor / aerosol.  P 280: Wear protective gloves / protective clothing / eye protection / face protection.  P 321: Special treatment (see ... on this label).  P 362: Take off contaminated clothing and wash before wearing again.